Non-Penetrating and Clamps to Standing Seams
Continuous Rail Sections | Customized Fit | Vertical or Curved Posts
Non-Penetrating Guardrail for Standing Seams
Standing Seam Guardrail System uses non-penetrating Mountings and Precise Fit architectural style Rail Sections. This system is 100% OSHA compliant, Made in USA and permanent.
Vertical or Curved Rail Sections
Vertical or curved architectural style Rail Sections look like an integrated part of the building. Options for this guardrail system are Self-Closing Safety Gates, Toeboards and fix roof ladder Integration.
Standing Seam Mount
Standing Seam Mount is non-penetrating and clamps to roofs with a 2/2.5 pitch or less. These mounts are available for seam widths of 16”, 18” and 24”.
Customizable Fit with Standard Parts
Precise Fit Rail Sections use standard off the shelf parts that provide a continuous, architectural design. Top and mid rails are trimmed at the jobsite for an exact fit. Countless fittings are in stock for transitioning over roof expansion joints, ducts, conduit and other obstacles.
Non-Penetrating Mount
- Material: mild steel
- Seam widths: 16”, 18” and 24”
- Finish: hot dipped galvanized
- Roof slope: 2.5/12 pitch or less
- Origin: 100% Made in USA
Precise Fit Rail Sections
- Lengths: up to 10’ (8’ for California)
- Material: schedule 40 pipe
- Heights: 42" for top rail and 21" for mid rail
- Finish: hot dipped galvanized
- Origin: 100% Made in USA
Guardrail Options
- Curved Rail Sections (same cost)
- Self-Closing Safety Gates
- Toeboards
- Integrates into existing roof access ladders
- Safety yellow powder coat over galvanized